[Dibbler] dibbler-client does not start (Lubuntu 14.04)

Schneider, Simon (NSN - DE/Dusseldorf) simon.schneider at nsn.com
Mon Jan 19 14:00:37 CET 2015


Hi,
Ok, I used "start" so far. "run" gives more info :-)

Log file is attached. Can you please check it? Thanks a lot!

Best regards, Simon





root at LubuntuVM1-1404:~# dibbler-client run
| Dibbler - a portable DHCPv6, version 1.0.0RC1 (CLIENT, Linux port)
| Authors : Tomasz Mrugalski<thomson(at)klub.com.pl>,Marek Senderski<msend(at)o2.pl>
| Licence : GNU GPL v2 only. Developed at Gdansk University of Technology.
| Homepage: http://klub.com.pl/dhcpv6/
2015.01.19 13:56:50 Client Notice    My pid (3135) is stored in /var/lib/dibbler/client.pid
2015.01.19 13:56:50 Client Notice    Detected iface eth1/3, MAC=08:00:27:a9:4e:9c.
2015.01.19 13:56:50 Client Notice    Detected iface eth0/2, MAC=08:00:27:62:79:bd.
2015.01.19 13:56:50 Client Notice    Detected iface lo/1, MAC=00:00:00:00:00:00.
2015.01.19 13:56:50 Client Notice    Parsing /etc/dibbler/client.conf config file...
56:50 Client Debug     Parsing /etc/dibbler/client.conf done, result=0
56:50 Client Debug     1 interface(s) specified in /etc/dibbler/client.conf
56:50 Client Info      Interface eth1/3 configuration has been loaded.
Segmentation fault (core dumped)






-----Original Message-----
From: Dibbler [mailto:dibbler-bounces at klub.com.pl] On Behalf Of ext Tomasz Mrugalski
Sent: Monday, January 19, 2015 12:47 PM
To: dibbler at klub.com.pl
Subject: Re: [Dibbler] dibbler-client does not start (Lubuntu 14.04)

On 19.01.2015 12:00, Schneider, Simon (NSN - DE/Dusseldorf) wrote:
> Yes, I guess I used the most simple config, just to get an IPv6
> address from the server. See below.
> 
> I added the "log-mode short" and "log-level 8" in an attempt to get
> more info, but it failed. No error message, also couldn't find a log
> file anywhere.
Did you use start or run? It has to print out something if you "run"
rather than "start" it. Maybe it couldn't create PID file? Here's what I
get when I run dibbler as non-root (you shouldn't do that, it's just a
demonstration that dibbler will report an error):

$ ./dibbler-client run
| Dibbler - a portable DHCPv6, version 1.0.0 (CLIENT, Linux port)
| Authors : Tomasz Mrugalski<thomson(at)klub.com.pl>,Marek
Senderski<msend(at)o2.pl>
| Licence : GNU GPL v2 only. Developed at Gdansk University of Technology.
| Homepage: http://klub.com.pl/dhcpv6/
2015.01.19 12:46:36 Client Critical  Unable to create
/var/lib/dibbler/client.pid file.
2015.01.19 12:46:36 Client Warning   Unable to delete
/var/lib/dibbler/client.pid.
$

As for the log file locations, the defaults are:
See Misc/Portable.h:
#define CLNTLOG_FILE       "/var/log/dibbler/dibbler-client.log"
#define SRVLOG_FILE        "/var/log/dibbler/dibbler-server.log"
#define RELLOG_FILE        "/var/log/dibbler/dibbler-relay.log"

Tomek
_______________________________________________
http://klub.com.pl/cgi-bin/mailman/listinfo/dibbler
-------------- next part --------------
A non-text attachment was scrubbed...
Name: dibbler-client.log
Type: application/octet-stream
Size: 11444 bytes
Desc: dibbler-client.log
URL: <http://klub.com.pl/pipermail/dibbler/attachments/20150119/8595c865/attachment.obj>


More information about the Dibbler mailing list