[Dibbler] Problem configuring Dibbler.... Need Help

Michael David servers.david at gmail.com
Thu Apr 4 04:37:28 CEST 2013


Thank you Jean. My client.conf looks like this:

 duid-type duid-ll
 log-level 8
 iface "eth0" {
 ia {
address {
2a01:e0b:2400:2a01:e0b:2400::1 }
}
pd
option dns-server
 #option domain
 }

where 2a01:e0b:2400 is my 48-subnet.

When I run dibbler, I get this:


[root at localhost dibbler]# nano /etc/dibbler/client.conf
[root at localhost dibbler]# dibbler-client run
| Dibbler - a portable DHCPv6, version 0.8.3 (CLIENT, Linux port)
| Authors : Tomasz Mrugalski<thomson(at)klub.com.pl>,Marek
Senderski<msend(at)o2.pl>
| Licence : GNU GPL v2 only. Developed at Gdansk University of Technology.
| Homepage: http://klub.com.pl/dhcpv6/
2013.04.04 08:03:30 Client Notice    My pid (32104) is stored in
/var/lib/dibbler/client.pid
2013.04.04 08:03:30 Client Notice    Detected iface eth0/3,
MAC=52:54:00:00:04:f1.
2013.04.04 08:03:30 Client Notice    Detected iface lo/1,
MAC=00:00:00:00:00:00.
2013.04.04 08:03:30 Client Notice    Parsing /etc/dibbler/client.conf
config file...
2013.04.04 08:03:30 Client Debug     Prefix delegation option found.
2013.04.04 08:03:30 Client Debug     Parsing /etc/dibbler/client.conf done,
result=0
2013.04.04 08:03:30 Client Debug     1 interface(s) specified in
/etc/dibbler/client.conf
2013.04.04 08:03:30 Client Info      Interface eth0/3 configuation has been
loaded.
2013.04.04 08:03:30 Client Debug     DUID's value =
00:03:00:01:52:fb:2b:63:1e:fe was loaded from client-duid file.
2013.04.04 08:03:30 Client Info      My DUID is
00:03:00:01:52:fb:2b:63:1e:fe.
2013.04.04 08:03:30 Client Info      Loading old address database
(client-AddrMgr.xml), using built-in routines.
2013.04.04 08:03:30 Client Info      DB timestamp:1365042709,
now()=1365042810, db is 101 second(s) old.
2013.04.04 08:03:30 Client Info      All client's
00:03:00:01:52:fb:2b:63:1e:fe leases are not valid.
2013.04.04 08:03:30 Client Debug     Bind reuse enabled (multiple instances
allowed).
2013.04.04 08:03:30 Client Notice    Creating control (::) socket on the
lo/1 interface.
2013.04.04 08:03:30 Client Notice    Creating socket
(addr=fe80::5054:ff:fe00:4f1) on eth0/3 interface.
2013.04.04 08:03:30 Client Debug     Initialising link-state detection for
interfaces: eth0/3
2013.04.04 08:03:30 Client Notice    CONFIRM support compiled in.
2013.04.04 08:03:30 Client Info      Creating SOLICIT message with 1 IA(s),
no TA and 1 PD(s) on eth0/3 interface.
2013.04.04 08:03:30 Client Debug     Sending SOLICIT(opts:1 3 25 8 6 ) on
eth0/3 to multicast.
2013.04.04 08:03:30 Client Debug     Sleeping for 1 second(s).
2013.04.04 08:03:31 Client Info      Processing msg
(SOLICIT,transID=0x8c2df7,opts: 1 3 25 8 6)
2013.04.04 08:03:31 Client Debug     Sending SOLICIT(opts:1 3 25 8 6 ) on
eth0/3 to multicast.
2013.04.04 08:03:31 Client Debug     Sleeping for 2 second(s).
2013.04.04 08:03:33 Client Info      Processing msg
(SOLICIT,transID=0x8c2df7,opts: 1 3 25 8 6)
2013.04.04 08:03:33 Client Debug     Sending SOLICIT(opts:1 3 25 8 6 ) on
eth0/3 to multicast.
2013.04.04 08:03:33 Client Debug     Sleeping for 4 second(s).
2013.04.04 08:03:37 Client Info      Processing msg
(SOLICIT,transID=0x8c2df7,opts: 1 3 25 8 6)
2013.04.04 08:03:37 Client Debug     Sending SOLICIT(opts:1 3 25 8 6 ) on
eth0/3 to multicast.
2013.04.04 08:03:37 Client Debug     Sleeping for 8 second(s).
2013.04.04 08:03:45 Client Info      Processing msg
(SOLICIT,transID=0x8c2df7,opts: 1 3 25 8 6)
2013.04.04 08:03:45 Client Debug     Sending SOLICIT(opts:1 3 25 8 6 ) on
eth0/3 to multicast.
2013.04.04 08:03:45 Client Debug     Sleeping for 17 second(s).
2013.04.04 08:04:02 Client Info      Processing msg
(SOLICIT,transID=0x8c2df7,opts: 1 3 25 8 6)

2013.04.04 08:04:02 Client Debug     Sending SOLICIT(opts:1 3 25 8 6 ) on
eth0/3 to multicast.
2013.04.04 08:04:02 Client Debug     Sleeping for 35 second(s).
[root at localhost dibbler]# nano /etc/dibbler/client.conf
[root at localhost dibbler]# dibbler-client run
| Dibbler - a portable DHCPv6, version 0.8.3 (CLIENT, Linux port)
| Authors : Tomasz Mrugalski<thomson(at)klub.com.pl>,Marek
Senderski<msend(at)o2.pl>
| Licence : GNU GPL v2 only. Developed at Gdansk University of Technology.
| Homepage: http://klub.com.pl/dhcpv6/
2013.04.04 08:03:30 Client Notice    My pid (32104) is stored in
/var/lib/dibbler/client.pid
2013.04.04 08:03:30 Client Notice    Detected iface eth0/3,
MAC=52:54:00:00:04:f1.
2013.04.04 08:03:30 Client Notice    Detected iface lo/1,
MAC=00:00:00:00:00:00.
2013.04.04 08:03:30 Client Notice    Parsing /etc/dibbler/client.conf
config file...
2013.04.04 08:03:30 Client Debug     Prefix delegation option found.
2013.04.04 08:03:30 Client Debug     Parsing /etc/dibbler/client.conf done,
result=0
2013.04.04 08:03:30 Client Debug     1 interface(s) specified in
/etc/dibbler/client.conf
2013.04.04 08:03:30 Client Info      Interface eth0/3 configuation has been
loaded.
2013.04.04 08:03:30 Client Debug     DUID's value =
00:03:00:01:52:fb:2b:63:1e:fe was loaded from client-duid file.
2013.04.04 08:03:30 Client Info      My DUID is
00:03:00:01:52:fb:2b:63:1e:fe.
2013.04.04 08:03:30 Client Info      Loading old address database
(client-AddrMgr.xml), using built-in routines.
2013.04.04 08:03:30 Client Info      DB timestamp:1365042709,
now()=1365042810, db is 101 second(s) old.
2013.04.04 08:03:30 Client Info      All client's
00:03:00:01:52:fb:2b:63:1e:fe leases are not valid.
2013.04.04 08:03:30 Client Debug     Bind reuse enabled (multiple instances
allowed).
2013.04.04 08:03:30 Client Notice    Creating control (::) socket on the
lo/1 interface.
2013.04.04 08:03:30 Client Notice    Creating socket
(addr=fe80::5054:ff:fe00:4f1) on eth0/3 interface.
2013.04.04 08:03:30 Client Debug     Initialising link-state detection for
interfaces: eth0/3
2013.04.04 08:03:30 Client Notice    CONFIRM support compiled in.
2013.04.04 08:03:30 Client Info      Creating SOLICIT message with 1 IA(s),
no TA and 1 PD(s) on eth0/3 interface.
2013.04.04 08:03:30 Client Debug     Sending SOLICIT(opts:1 3 25 8 6 ) on
eth0/3 to multicast.
2013.04.04 08:03:30 Client Debug     Sleeping for 1 second(s).
2013.04.04 08:03:31 Client Info      Processing msg
(SOLICIT,transID=0x8c2df7,opts: 1 3 25 8 6)
2013.04.04 08:03:31 Client Debug     Sending SOLICIT(opts:1 3 25 8 6 ) on
eth0/3 to multicast.
2013.04.04 08:03:31 Client Debug     Sleeping for 2 second(s).
2013.04.04 08:03:33 Client Info      Processing msg
(SOLICIT,transID=0x8c2df7,opts: 1 3 25 8 6)
2013.04.04 08:03:33 Client Debug     Sending SOLICIT(opts:1 3 25 8 6 ) on
eth0/3 to multicast.
2013.04.04 08:03:33 Client Debug     Sleeping for 4 second(s).
2013.04.04 08:03:37 Client Info      Processing msg
(SOLICIT,transID=0x8c2df7,opts: 1 3 25 8 6)
2013.04.04 08:03:37 Client Debug     Sending SOLICIT(opts:1 3 25 8 6 ) on
eth0/3 to multicast.
2013.04.04 08:03:37 Client Debug     Sleeping for 8 second(s).
2013.04.04 08:03:45 Client Info      Processing msg
(SOLICIT,transID=0x8c2df7,opts: 1 3 25 8 6)
2013.04.04 08:03:45 Client Debug     Sending SOLICIT(opts:1 3 25 8 6 ) on
eth0/3 to multicast.
2013.04.04 08:03:45 Client Debug     Sleeping for 17 second(s).
2013.04.04 08:04:02 Client Info      Processing msg
(SOLICIT,transID=0x8c2df7,opts: 1 3 25 8 6)
2013.04.04 08:04:02 Client Debug     Sending SOLICIT(opts:1 3 25 8 6 ) on
eth0/3 to multicast.
2013.04.04 08:04:02 Client Debug     Sleeping for 35 second(s).

Any ideas???


On Thu, Apr 4, 2013 at 12:47 AM, Jean-Jacques Sarton <jj.sarton at web.de>wrote:

> Hello Michael,
>
> I am als a new dibbler user, but I have already some experience.
>
> You have only one network interface on your system. This mean
> that you will not be able to get a prefix delegation unless you
> modify the configurations file.
> Dibbler normally don't use the interface attached to the server.
> If your client.conf file contain
> ------------------
> duid-type duid-ll
> log-level 8
> downlink-prefix-ifaces eth0
> iface "eth0" {
>  pd
>  option dns-server
>  option domain
> }
> the prefix will be acquired you will see that within the
> log output.
> But you will not get an address.
> You may at a later stage insert before pd
> the line
>  ia { address { <your-48-subnet>:<your-main-subnet>::1 } }
>
>
> Please replace <your-48-subnet> with the delegated prefix
> and if you use the first subnet (0) :<your-main-subnet>
> with nothings.
> The result may be 2001:db8:bebe::1
>
>
>
>
>
>
> Am 03.04.2013 19:46, schrieb Michael David:
> > Hi,
> >
> > I am a new user of Dibbler.
> >
> > I have got a new server from online.net
> >
> > Now, I am trying to setup IPV6 for my server - i.e. get an IPV6 address
> for
> > my server. Online.net uses dibbler.
> >
> > I have set up dibbler (latest stable version) from source on CentOS 6.
> >
> > Their documentation for ipv6 is here:
> >
> > http://documentation.online.net/fr/serveur-dedie/reseau/prefixe_ipv6
> >
> > When I run
> >
> >   dibbler-client run
> >
> > I get this:
> >
> > 2013.04.03 23:06:35 Client Debug     Authentication is disabled, not
> > including auth options in message.
> >
> > 2013.04.03 23:06:35 Client Debug     Sending RENEW(opts:1 2 25 8 6 )
> > on eth0/3 to multicast.
> > 2013.04.03 23:06:35 Client Debug     Sleeping for 10 second(s).
> > 2013.04.03 23:06:35 Client Debug     Received 131 bytes on interface
> > eth0/3 (socket=5, addr=fe80::32e4:dbff:fef9:671f).
> >
> > 2013.04.03 23:06:35 Client Info      Received REPLY on
> > eth0/3,TransID=0x7da4e4, 5 opts: 25 2 1 7 23
> > 2013.04.03 23:06:35 Client Notice    PD: Updating prefix
> > 2a01:e0b:2400::/48 to all interfaces (prefix will be split to /56
> > prefixes if necessary).
> >
> > 2013.04.03 23:06:35 Client Debug     PD: Interface eth0/3 is the
> > interface, where prefix has been obtained, skipping.
> > 2013.04.03 23:06:35 Client Debug     PD: Interface lo/1 is not
> > multicast capable, ignoring.
> > 2013.04.03 23:06:35 Client Info      PD: Using 0 suitable interface(s):
> >
> > 2013.04.03 23:06:35 Client Warning   Suitable interfaces not found.
> > Delegated prefix not split.
> > 2013.04.03 23:06:35 Client Debug     RENEW(IA_PD) will be sent (T1)
> > after 1800, REBIND (T2) after 3600 seconds.
> > 2013.04.03 23:06:35 Client Debug     Not executing external script
> > (Notify script disabled).
> >
> > 2013.04.03 23:06:35 Client Debug     Sleeping for 1800 second(s).
> >
> > And no ipv6 address gets assigned to the eth0 interface.
> >
> > Then I thought, I need to setup dhcpclient also as per their
> > instructions. I have done the same.
> >
> > When I run:
> >
> > dhclient -cf /etc/dhcp/dhclient6.conf -6 -P -v eth0
> >
> > I get this:
> >
> > XMT:  X-- IA_PD 00:00:04:f1
> > XMT:  | X-- Request renew in  +3600
> > XMT:  | X-- Request rebind in +5400
> > XMT: Solicit on eth0, interval 4050ms.
> > 2013.04.03 23:09:13 Client Debug     Received 163 bytes on interface
> > eth0/3 (socket=5, addr=fe80::32e4:dbff:fef9:671f).
> >
> > 2013.04.03 23:09:13 Client Info      Received ADVERTISE on
> > eth0/3,TransID=0x5cd0b2, 6 opts: 25 2 1 7 23 24
> > 2013.04.03 23:09:13 Client Warning   Message with wrong transID
> > (0x5cd0b2) received. Ignoring.
> > 2013.04.03 23:09:13 Client Debug     Sleeping for 1642 second(s).
> >
> > XMT: Forming Solicit, 7180 ms elapsed.
> > XMT:  X-- IA_PD 00:00:04:f1
> > XMT:  | X-- Request renew in  +3600
> >
> > And again no IPV6 address is assigned.
> >
> > Please can someone tell me how to get 2 static IPV6 addresses assigned
> > to my server.
> >
> > That is all I want to do and I have been trying for the last 10 hrs
> > with absolutely no support from my host :-(
> >
> > Hence this mail to the list.
> >
> > Thanks
> >
> > Michael
> >
> >
> >
> > _______________________________________________
> > http://klub.com.pl/cgi-bin/mailman/listinfo/dibbler
> >
>
> _______________________________________________
> http://klub.com.pl/cgi-bin/mailman/listinfo/dibbler
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://klub.com.pl/pipermail/dibbler/attachments/20130404/17e9a239/attachment-0001.html>


More information about the Dibbler mailing list